APPLICATIONS
BHG cabinets can be used in a wide range of disciplines, as defined in appropriate standards.
Especially suitable for applications such as:
- Microbiology
- Virology
- Haematology
- Cell culture
- Recombinant DNA
- Handling of hazardous agents to human beings or animals as defined in the appropriate international standards.

BENEFITS
- Sophisticated microprocessor based monitoring system
- Sophisticated microprocessor based system of audible and visual alarms alerts the operator if the cabinet does not run in complete safety.
- Self-adjusting system to ensure a constant laminar airflow speed even in the presence of a progressive clogging of the filters.
- The negative pressure plenum "bio-dynamic sealing" ensures that all contaminated particles are kept inside the system and are automatically drawn to the pressure chamber to be captured by the main and exhaust filters.
- The fan system assures that no part of the cabinet is under positive contaminated pressure to the laboratory, thus preserving environment and personnel from bio-contamination risks.
- Access from the front panel for ease of maintenance service.
- Available in one motor (BHG 2004 S) as well as two motors (BHG 2004 D) versions for flexible performance selection in line with the cabinet's use.
- The electrically driven sash window (easily moved up and down by merely pressing the keys placed on the front panel) can be completely closed or opened to make the operator's work easier.

SPECIFICATIONS
Construction: Epoxy powder painted steel for improved strength and resistance to corrosion and atmospheric agents.

Work Surface: 3, 4 or 6  pieces (depending on the cabinet width) AISI-316L stainless steel, completely perforated to ensure flow laminarity and air recycling at the work surface level. Frontal slots in the access area provide air barrier protection preventing any exchange of  air between the inside of the cabinet and the environment.
On request the following work surfaces are available with no extra charges:

- AISI-316L stainless steel perforated work surface in 1 piece
- AISI-316L stainless steel solid work surface in 1 piece or 3, 4, 6 pieces (depending on the cabinet width).

Absolute Filters: HEPA filters, tested with D.O.P. aerosol. Their efficiency, higher than 99,995% MPPS - 0.005% penetration - ensures a performance exceeding the requirements of EN 1822, U.S. Federal Standard 209 e and AS 1386-1976.
The filtration system is designed to provide a barrier of air with minimum average speed over 0.4m/sec. according to EN-12469.

Motor-blower/s: One centrifugal fan (BHG 2004 S) and two centrifugal fans (BHG 2004 D), direct driven motors, with protection factor IP-55, controlled by two automatic speed regulators and microprocessor system showing laminar flow and protection barrier work conditions.

Microprocessor based monitoring system: new generation system for controlling the cabinet in a full digital way performs high level control and data processing.
The handy and practical keyboard and the rearlit LCD display keep the user constantly informed of the cabinet conditions and operation, in particular:

- display of laminar airflow velocity and frontal air barrier velocity
- display of inside and outside temperature
- display of residual lifetime of HEPA filters, U.V. Lamp and charcoal filter (if installed)
- display of total time of cabinet operation
- display of power rating factor of the main and exhaust (if installed) motor-blowers.

Alarms for:
- out of range laminar airflow velocity and front air barrier velocity
- front window out of the working position (200 mm).
- HEPA filters clogging
- UV lamp worn-out (if installed)
- charcoal filter (if installed) saturated
- blackout
- signal of other possible malfunctions and relevant remedies.

Power Supply: 230V, 50Hz, single phase.

Lighting: fluorescent tubes in built-in housing, placed outside the contaminated area.

Front window: Stratified safety glass. The 3 degrees sloping fronted window optimizes the visibility inside the work chamber. When the cabinet is off, the window can be opened to 465 mm maximum or can be completely closed.

Additional Features:
- two vacuum or gas connections in the working area are provided, one with manual tap, the other with solenoid valve (on the right-hand side).
- A stainless steel spillage tray beneath the work surface collects spilt liquids.
- An inlet allows the DOP test of the absolute HEPA filters.
- Electrical socket with protection IP-44 (on the right-hand side)
- Maintenance: access to filters, motor-blower/s and control panel by lifting the front panel.

As option
- UV lamp for sterilization of the work chamber installed on a stainless steel front closure, controlled by two timers, one with 0¸3 hours scale (1 minute steps), the other 3 fixed hours.